Small Parts Cloth-Inserted Silicone Rubber Sheet, No Backing, 70A Durometer, Smooth, MIL-ZZR-765, Red, 1/16" Thick, 12" Width, 12" Length

Cloth-Inserted Silicone Rubber Sheet, No Backing, 70A Durometer, Smooth, MIL-ZZR-765, Red, 1/16" Thick, 12" Width, 12" Length Review

Cloth-Inserted Silicone Rubber Sheet, No Backing, 70A Durometer, Smooth, MIL-ZZR-765, Red, 1/16" Thick, 12" Width, 12" Length Feature

• Designed for use in applications where stresses are typically static and pressures are usually low
• Fabric featuring flame and heat resistance
• Excellent dimensional stability
• Fungus and mildew resistant
• Inert to most common chemicals

Cloth-Inserted Silicone Rubber Sheet, No Backing, 70A Durometer, Smooth, MIL-ZZR-765, Red, 1/16" Thick, 12" Width, 12" Length Overview

Reinforced silicone rubber can be used as a flange gasket where bolt or compression loads are so high that non-reinforced rubber would squeeze or extrude out between the flanges. Typical applications include meters, control devices, welding curtains, regulators, pumps, and diaphragms.

Rubber-Cal Nitrile NBR Rubber Sheet - Buna Rubber - 1/16" Thick x 36" Width x 24" Length

Nitrile NBR Rubber Sheet - Buna Rubber - 1/16" Thick x 36" Width x 24" Length Review

Nitrile NBR Rubber Sheet - Buna Rubber - 1/16" Thick x 36" Width x 24" Length Feature

• A black Nitrile rubber gasket material that has excellent chemical resistance
• Nitrile NBR rubber sheeting with minimum tensile strength of 725 PSI (5 MPA)
• Pre-cut widths and lengths available in 6 thicknesses (1/16, 1/8, 3/16, 1/4, 3/8, 1/2 inch)
• Nitrile (AKA Buna, Buna-N or NBR) is great for industrial oil grease resistant applications
• This Nitrile rubber sheeting has a medium grade durometer of 55-65 and offers moderate pliability

Nitrile NBR Rubber Sheet - Buna Rubber - 1/16" Thick x 36" Width x 24" Length Overview

Black Nitrile sheet is designed for pads, seals, and general gasket applications where animal, organic or industrial oils are present. Nitrile rubber sheet has very good resistance to all synthetic and natural grease products and it is recommended for use in areas where petroleum products are present. Nitrile (AKA Buna or Buna-N) has excellent abrasion resistant qualities. Hence, it is used in industrial oil and gas production facilities, commercial food processing plants, and automotive related applications.

Small Parts Hypalon Sheet, Black, 1/16" Thick, 12" Width, 12" Length

Hypalon Sheet, Black, 1/16" Thick, 12" Width, 12" Length Review

Hypalon Sheet, Black, 1/16" Thick, 12" Width, 12" Length Feature

• Superior Weatherability
• Resistant to Ozone
• High UV Resistance
• Chemical Resistant
• Good Temperature Resistance

Hypalon Sheet, Black, 1/16" Thick, 12" Width, 12" Length Overview

Hypalonis also known as chlorosulfonated polyethylene, It has superior weatherability and resistance to ozone, chemicals, and oil even at high temperatures. It also resists flex cracking and abrasion from weather, heat, and chemical exposure. Because of these properties and the fact that it has low water absorption. Hypalon is often used in roofing systems, hose and timing belts, and insulation.

Small Parts Rubber Sheet, Red, 1/16" Thick, 12" Width, 24" Length

Rubber Sheet, Red, 1/16" Thick, 12" Width, 24" Length Review

Rubber Sheet, Red, 1/16" Thick, 12" Width, 24" Length Feature

• Cost Effective
• Conformable
• Abrasion Resistant
• Dense
• General Plumbing Use

Rubber Sheet, Red, 1/16" Thick, 12" Width, 24" Length Overview

Red Sheet is a blend of SBR (Styrene Butadiene Rubber) and other natural rubbers. Red sheet rubber is a cost effective rubber sheet and is not recommended for oil and ozone-resistant applications. It conforms easily to uneven flange surfaces and is an appealing product for the cost conscious industrial consumer. Red sheet has a 65-75 durometer range making it a harder, denser and more abrasion resistant rubber sheet. Often used in the plumbing trade for shower floor pan underlayment.

Small Parts Pure Gum Rubber Sheet, Tan, 1/8" Thick, 12" Width, 24" Length

Pure Gum Rubber Sheet, Tan, 1/8" Thick, 12" Width, 24" Length Review

Pure Gum Rubber Sheet, Tan, 1/8" Thick, 12" Width, 24" Length Feature

• High Tensile Strength
• Very High Elongation
• Superior Abrasion Resistance
• Non Marking
• Smooth Finish

Pure Gum Rubber Sheet, Tan, 1/8" Thick, 12" Width, 24" Length Overview

Natural Rubber or Pure Gum Rubber. Full-floating, natural rubber. For installation requiring high tensile and elongation characteristics along with superior abrasion resistance. Also for applications requiring a soft rubber seal. Conforms to irregular flanges with bolt heads. Resists most organic salts, acids, alkalis, and ammonia. Non-marking. Smooth finish

Rubber-Cal EPDM Rubber Sheet - 1/4" Thick x 36" Width x 24" Length - Black

EPDM Rubber Sheet - 1/4" Thick x 36" Width x 24" Length - Black Review

EPDM Rubber Sheet - 1/4" Thick x 36" Width x 24" Length - Black Feature

• This flexible EPDM roll products offers good pliability and elasticity
• This EPDM rubber (blend) has a minimum tensile strength of 725 PSI (5 MPA)
• An Ideal EPDM gasket material it weighs 1.25LBS per square foot in 1/8" thick
• 55-65 Durometer EDPM rubber sheet in a black rubber, cut it into rubber strips!
• EPDM material have excellent outdoor life and are highly recommended for UV resistant use.

EPDM Rubber Sheet - 1/4" Thick x 36" Width x 24" Length - Black Overview

This blended rubber sheet, Ethylene Propylene Diene Monomer, provides very good resistance to weathering, ozone and UV exposure. It is highly recommended for applications where the elastomer will have excessive exposure to the environment. EPDM makes a great hanger flap, roof pad, or outdoor industrial rubber curtain. It provides very good chemical resistance and dynamic properties. E.P.D.M. blended material is considered a non-oil resistant material. Available in 6 thicknesses (1/16", 1/8", 3/16", 1/4", 3/8", 1/2")

Small Parts Nitrile Rubber Ball, 1/2" Diameter (Pack of 100)

Nitrile Rubber Ball, 1/2" Diameter (Pack of 100) Review

Nitrile Rubber Ball, 1/2" Diameter (Pack of 100) Feature

• Nitrile Rubber
• 70 Shore A
• Centerless Ground
• Pneumatic, hydraulic and water applications
• Close tolerances on sphericity

Nitrile Rubber Ball, 1/2" Diameter (Pack of 100) Overview

These Nitrile Rubber balls are molded from a 70 Shore A nitrile compound specially formulated for grinding. These balls are recommended for most typical pneumatic, hydraulic, or water applications. High speed centerless grinding combined with automatic gauging assures consistent part quality with close tolerances on both spherical and diametric dimensions. The resulting uniform finish ensures consistent sealing performance regardless of how the ball seats.

Small Parts Buna-N Sheet, 50-65 Durometer, White, 1/16" Thick, 12" Width, 24" Length

Buna-N Sheet, 50-65 Durometer, White, 1/16" Thick, 12" Width, 24" Length Review

Buna-N Sheet, 50-65 Durometer, White, 1/16" Thick, 12" Width, 24" Length Feature

• Temperature range is -20 to 180 F.
• It is recommended for applications that come in contact with most oils and greases
• Good For General Gasket Use
• Moderate Ozone Resistance
• Hardness is 50-65 Shore A

Buna-N Sheet, 50-65 Durometer, White, 1/16" Thick, 12" Width, 24" Length Overview

Buna N Nitrile Rubber Sheet is used for pads, seals, and general gasket applications. It is recommended for applications that come in contact with most oils and greases and has moderate ozone resistance. Temperature range is -20 to 180 F.Hardness is 50-65 Shore A